Why is My Brother sewing machine not picking up bobbin thread?
There could be several things that could cause the machine not to pick up the bobbin thread. The upper thread could be tangled. Remove the thread completely from the machine. The correct size spool cap should be used for the size of the thread spool.
Where does the bottom bobbin thread go?
Once you have a wound bobbin, it goes in the machine’s bobbin case to supply the lower thread as your machine sews. To load your bobbin, lift your needle and presser foot to the highest position (your machine will either use a hand wheel or a button for this) and remove the bobbin cover.
Why is my bobbin thread coming through?
If the bobbin thread is on top, that means the top thread is pulling more, or, has more tension. That means either the top thread is too tight or the bobbin thread is too loose.
What is wrong with my sewing machine bobbin?
There are several culprits for this ranging from a dull needle, improper threading or tension. The tension in both your upper and bobbin threads need to be even. The bobbin could also be placed incorrectly. More than likely, you forgot to put the bobbin back correctly while cleaning your machine.
Does bobbin thread go through needle?
Thread from the spool goes through the needle’s eye. Thread from the bobbin comes up through the needle plate.
How does the bobbin thread work?
The bobbin sits just beneath the needle in its compartment,known as a bobbin case. … If you happen to look at a sew being formed, you will see how the needle reaches into the bobbin case and pulls a thread for each cycle, loops it with the upper thread, and creates a complete sew on the pressed fabric.
How do you tell if your bobbin tension is off?
The thread should unwind just slightly and the bobbin case should drop an inch or two. If the thread unwinds without resistance and the case slips to the floor, your bobbin tension is too loose. If the bobbin case doesn’t budge, your bobbin tension is too tight.
Why won’t my sewing machine wind the bobbin?
If your bobbin does not wind quickly and smoothly when you press on your foot pedal, your bobbin winder might not be fully engaged. This can cause uneven winding. Make sure you push your bobbin pin all the way over or loosen your bobbin wheel completely to engage your bobbin winding mechanism.
Does thread go under presser foot?
Double check to make sure the thread is through the tension properly. Once you’ve threaded the needle, put the thread straight back (but not under the presser foot). Keep the presser foot up, and note that the thread should be fairly easy to pull.