How do you thread a bobbin Singer top loader?

Which way does bobbin thread go?

Insert the bobbin making sure the bobbin rotates counterclockwise when you pull the thread. NOTE: This is a very important step as the bobbin can become unthreaded and cause sewing problems if it rotates clockwise. 4. Pull the thread through the slot (A) and then to the left.

Why isn t my sewing machine catching the bobbin thread?

Why won’t my machine pick up the bobbin thread? … Also, make sure your bobbin is in correctly (not backwards) and that the upper tension disks of your machine are threaded correctly. Make sure the presser foot is up when seating the thread through the upper tension. Now, it’s time to draw up your bobbin thread.

Is it OK to sew with bobbin thread?

A quality bobbin thread can be almost as strong as normal sewing thread. Regular weight sewing thread would be used in almost all sewing, but bobbin thread is a welcome addition to your sewing basket when the need arises.

Does the bobbin thread go through the needle?

Thread from the spool goes through the needle’s eye. Thread from the bobbin comes up through the needle plate.

Does bobbin direction matter?

Make sure the bobbin thread unrolls in the correct direction when installing the bobbin into the bobbin case. Be sure to set a bobbin so that the thread unrolls in the correct direction. If the thread unrolls in the wrong direction, the needle may break or the thread tension will be incorrect.

IT IS INTERESTING:  What do I need to sew curtains?

Are all Singer Bobbins the same?

Bobbin Tips & Hints

Use only bobbins that are the same class/style as those that come with your machine – don’t substitute! SINGER® branded bobbins are recommended for best results.

What bobbins does a singer simple use?

The Singer Simple 3223 sewing machine uses a very common size of bobbin – Clear (or plastic) Class 15 bobbins. This size of bobbin is easy to find at any sewing machine store or online.

How do you make a bobbin for a singer?

Serger Help

  1. Place spool of thread on spool pin. …
  2. Pass thread end, from inside, through the small hole in the rim of the bobbin (illustration 2).
  3. Place bobbin onto the pin. …
  4. Holding thread end, step on speed controller to run the machine until the desired amount of thread is wound. …
  5. Trim thread ends from top of the bobbin.
Thread-Needle