Quick Answer: Why isn’t my sewing machine catching the bobbin thread?

Why won’t my machine pick up the bobbin thread? … Also, make sure your bobbin is in correctly (not backwards) and that the upper tension disks of your machine are threaded correctly. Make sure the presser foot is up when seating the thread through the upper tension. Now, it’s time to draw up your bobbin thread.

Why is my bobbin not working?

This usually happens if there is grease and dust build up in the bobbin compartment. It can also occur if the bobbin thread is not attached correctly, the thread has formed a knot or a problem with the bobbin case. Open the bobbin compartment, remove the entire bobbin case and clean up the area around the bobbin.

Why won’t my sewing machine wind the bobbin?

If your bobbin does not wind quickly and smoothly when you press on your foot pedal, your bobbin winder might not be fully engaged. This can cause uneven winding. Make sure you push your bobbin pin all the way over or loosen your bobbin wheel completely to engage your bobbin winding mechanism.

What tension should my sewing machine be on?

The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.

IT IS INTERESTING:  Why are my stitches loose on my Brother sewing machine?

Why is my thread bunching up underneath?

A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.

How do I fix the timing on my sewing machine?

Check for a timing issue by performing a timing test.

  1. Leave the needle threaded, but remove the switchplate, base cover(s), and bobbin case.
  2. Turn the hand wheel slowly to ensure that the shuttle hook is smoothly catching the thread. …
  3. Use a ruler to measure the timing settings.
Thread-Needle