If it is not in the correct position, the needle will not go down and pick-up your bobbin thread. … Also, make sure your bobbin is in correctly (not backwards) and that the upper tension disks of your machine are threaded correctly. Make sure the presser foot is up when seating the thread through the upper tension.
Why is My Brother sewing machine not picking up bobbin thread?
There could be several things that could cause the machine not to pick up the bobbin thread. The upper thread could be tangled. Remove the thread completely from the machine. The correct size spool cap should be used for the size of the thread spool.
How do you increase bobbin thread?
Raising the Bobbin Thread
- Ensure that the power is switched off.
- Raise the needle to the highest point by turning the hand wheel slowly towards you.
- Raise the presser foot.
- Hold the needle thread.
- Turn the hand wheel slowly towards you to lower and raise the needle.
- Gently pull the needle thread to pull up the bobbin thread.
- Open the loop.
Does the bobbin thread go through the needle?
Thread from the spool goes through the needle’s eye. Thread from the bobbin comes up through the needle plate.
Why is my bobbin not working?
This usually happens if there is grease and dust build up in the bobbin compartment. It can also occur if the bobbin thread is not attached correctly, the thread has formed a knot or a problem with the bobbin case. Open the bobbin compartment, remove the entire bobbin case and clean up the area around the bobbin.
How do you adjust the tension on a bobbin?
To tighten your bobbin tension, turn the tiny screw on the bobbin case a smidgen clockwise. To loosen bobbin tension, turn the screw counterclockwise. A quarter turn or less is a good place to start.
Why does my sewing machine keep jamming?
1 5 Reasons Why Your Sewing Machine Keeps Jamming: 1.1 Lack of tension on the upper thread. 1.2 Your machine is clogged at some point or place. 1.3 The needle is deformed or broken.
When should I replace my bobbin case?
As long as you take good care of your bobbin case, it will perform well. However, eventually, it will cease to sew smoothly and will need to be replaced. Sometimes people think they only need to replace certain parts of the bobbin case, like the tension spring or the tension screw.