Check the tension on your sewing machine, as too much tension may pull the threads too tightly and loose tension may not pull the threads tight enough. Set it at the middle range and test it from there, trying to make a zigzag stitch using a greater or lesser tension.
What tension should I use for zig zag stitch?
The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.
Why is my zigzag stitch loose?
The middle row of stitches on the swatch is very loose in addition to not looking right. Solution: Rethread the machine. If that doesn’t work, adjust the tension. Explanation: When the thread loops on the backside of the fabric, that’s an indication the upper thread is not threaded correctly.
What settings should my sewing machine be on?
Most sewing is done in the 2.0 to 2.5 range. If you are foundation paper piecing, you may want to decrease your stitch length so that the paper tears away easier. Top stitching and quilting are usually done in the 3.0 to 3.5 range. Basting and gathering stitches are the longest, from 4.0 – 5.0.
What are the settings for a straight stitch on a sewing machine?
Basic Settings for Sewing Straight Stitches on a Sewing Machine
- Stitch Length: 2.5mm or 10 (stitches per inch)
- Stitch Width: needle centered over stitch plate*
- Stitch Tension: 4.
Why isn’t my zigzag stitch not working?
Try some of the simple things first. Remove the bobbin plate using a screwdriver and then remove the bobbin. Clean out any lint that may be under the bobbin and which may cause your zigzag stitch not to work. Replace the bobbin and the bobbin plate and test your zigzag stitch.
Is a zigzag stitch stronger than a straight stitch?
Though straight stitch is considered as the strongest stitch, zigzag is one of the most durable stitches. There are ways in which you can make the hold stronger. For instance, the triple zigzag is stronger compared to the ordinary zigzag ones.
Why is my bottom stitch not straight?
If your thread is pulled tight on the underside and not forming an even stitch then (counter-intuitively) it’s usually the top thread tension that’s wrong. Sometimes very lightweight fabrics such as sheers can get dragged down into the machine so it’s a good idea to use a straight stitch plate.
What causes thread to bunch up when sewing?
What should I do if I experience thread bunching? As “thread bunching” occurs on the underside of the fabric, some people think it is due to the lower thread. They check whether the bobbin is sitting correctly in the bobbin case or even replace the bobbin. … On many models, the upper thread tension is set automatically.
Why is my bottom stitch looping?
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.
How do you troubleshoot a sewing machine stitch?
21 Stitching Problems On Sewing Machines (and easy solutions)
- Check the needles isn’t bent.
- Check the needle size.
- Let the machine pull the fabric at its own speed.
- Use a table to catch the fabric.
- Needle and thread must match.
- Check the timing of the machine.