Your question: What is the first step in threading the lower part of the sewing machine?

First step is winding the bobbin. Sewing machines need an upper and a lower thread to form the stitches. The lower thread is kept in a small bobbin stored underneath the presser foot. The mechanism for winding the bobbin may vary based on the model of your sewing machine.

What is the steps in threading the lower part?

STEPS:

  • Put the spool of thread on the spool pin.
  • Bring the thread to the thread guide .
  • Pull the thread between the metal disc of the tension.
  • Bring the thread up to the thread take up lever and raise it as it goes.
  • Pull the thread down to the thread guide.
  • Pull it through the lower thread guide.
  • Thread the needle.

What are the steps to threading a sewing machine?

How to Thread a Sewing Machine

  1. Wind a bobbin. The bobbin is the lower spool of thread for your machine. …
  2. Load your wound bobbin. …
  3. Place the spool. …
  4. Thread through the thread guide. …
  5. Pull the thread through the U-shaped guide. …
  6. Wrap the thread around the thread take-up lever. …
  7. Thread the needle. …
  8. Catch the thread.
IT IS INTERESTING:  What is the best lightweight sewing machine?

What is the order of threading in the upper part of the machine?

Order of threading in the upper parts: 1. Spool pin 2. Thread Guide 3. Between metal disc of tension 4.

Do you need upper and lower thread to sew?

Sewing machines need an upper and a lower thread to form the stitches. The lower thread is kept in a small bobbin stored underneath the presser foot. … If that’s not your case, you’re going to have to pull the end of the thread through the little pinhole on top of the bobbin.

Which is the common cause of machine troubles?

Needle put in the wrong way round. Insufficient pressure on the pressure foot. Blunt or bent needle.

Why is my thread bunching on the bottom?

A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.

Does the bobbin thread go through the needle?

Thread from the spool goes through the needle’s eye. Thread from the bobbin comes up through the needle plate.

Should the presser foot be up or down when threading a sewing machine?

If the presser foot is up when you thread, your thread will slide right between the discs and then, as you sew, it will be properly regulated by your machine. If you thread your machine with your foot down, the thread will most likely not slide between the tension discs.

IT IS INTERESTING:  What does slip the first stitch mean?

How do you get the bobbin thread up?

Raising the Bobbin Thread

  1. Ensure that the power is switched off.
  2. Raise the needle to the highest point by turning the hand wheel slowly towards you.
  3. Raise the presser foot.
  4. Hold the needle thread.
  5. Turn the hand wheel slowly towards you to lower and raise the needle.
  6. Gently pull the needle thread to pull up the bobbin thread.
  7. Open the loop.

Why is my machine sewing gathers?

Friction between layers of materials. When sewing, the feed dog grips the fabric to help the material pass through the machine. … You need to re-sew the affected parts, or use a suitable presser foot to lower friction. Friction between layers of fabric built up during sewing may cause seam gathering/puckering.

What are the steps in threading the upper part?

STEPS IN THREADING THE UPPER PART _Thrend the needle. _Pull it through the lower thread guide. _Pull the thrend down on the thread guide. _Bring thread to the thread guide.

How do you do upper threading?

UPPER THREADING

  1. Raise the presser foot lever. …
  2. Press the “NEEDLE POSITION” button to raise the needle.
  3. Place the spool of thread on the spool pin so that the thread comes from the front of the spool. …
  4. While holding the end of the thread with your left hand, pass the thread through the guides in the order shown by the numbers.

23.03.2016

Thread-Needle